Showing posts with label Chino. Show all posts
Showing posts with label Chino. Show all posts

Creating a Calibration Curve with the CHINO IMRA Infrared Multi Analyzer


The CHINO IMRA on-line multi IR wavelength analyzer utilizes infrared absorption technology to measure moisture, film-thickness, organic properties, and coating-thickness in real time. Signal processing capabilities are built into the compact, stand-alone detector unit for easy installation and operation. A maximum of 99 calibration curves can be stored into the detector memory for numerous measurement applications. This video demonstrates how to create a calibration curve. In this demonstration, moisture content is measured in sand. 

For more information about CHINO moisture, film-thickness, organic properties, and coating-thickness analyzers, contact Power Specialties, Inc. by calling (816) 353-6550 of visit their website at https://powerspecialties.com.

Chino IRMA Analyzer Re-Zeroing Calibration Procedure

The Chino IM series is an on-line multi IR wavelength analyzer utilizing the infrared absorption technology for measuring product constituent and/or thickness. Watch the video below for instructions on re-zeroing the IRMA calibration.

https://powerspecialties.com 
(816) 353-6550

Moisture Measurement in Sugar Production

Moisture detection in sugar production
Moisture detection in sugar production.
The sugar industry processes sugar cane and sugar beets to manufacture edible sugar. To achieve high quality sugar, improve efficiency and keep production cost in check, moisture detectors are employed to deliver accurate moisture analysis during several stages of the process.

Typical processes are as follows;

Washing/Preparation/Extraction

Sugar cane:
  • Milling with water, extracting raw juice -> purification
Sugar beet: 
  • Diffusing with hot water, extracting raw juice -> purification. 
Moisture detection in sugar productionPurification / Refining
  • Crystallized sugar after purification is called "raw sugar". Raw sugar is then dried and may be further refined before bagging for shipment. 
CHINO's IM Series online system can measure moisture to maintain product consistency as well as energy efficiency at the following parts of the sugar manufacturing process.

Moisture detection in sugar productionMoisture measurement of "Bagasse" (fiber residue of the canes).
  • 10% - 40% (Accuracy: +/- 0.5%) 
  • Bagasse is mainly used as a biofuel, renewable resource in the pulp, paper products and building materials.
Moisture measurement of "used cossettes" (sliced beets used for diffusion).
Moisture detection in sugar production
  • 30% - 70% (Accuracy: +/- 0.5%)
  • Used cossettes are dried and sold as animal feed
Moisture control of raw sugar and during refinery
  • IM Series is equipped w/ 4-20mA analog output which can be easily incorporated with existing process control systems.
For more information, visit Power Specialties at https://www.powerspecialties.com or call (816) 353-6550.

Moisture Measurement for Incinerator Ash

Moisture Measurement for Incinerator Ash

Incinerator ash needs extensive moisture control; ash would be scattered around with very low moisture, while excess moisture would cost more (to transport).

CHINO's IM series can measure the moisture of the ash placed on the running conveyor belt quickly and without touching the material. As the results, the amount of water mixed into the ash after the burning process can be controlled properly and easily.

Because there is dust around the installation area, IRMA should be kept inside an insulated cooling box, with air purged. Usually the moisture of incinerator ash can be measured within 0 to 30 %( ±0.5% accuracy).

IM Series is equipped w/ 4-20mA Analog output which can be easily incorporated with existing process control systems.

moisture in incinerator ash

Moisture Measurement for Incinerator Ash

moisture in incinerator ash

Recommended model / Item
  • General moisture unit Model : IRMA1100S 
  • Air purge hood Model : IR-WEA 
  • Calibration checker plate Model : IR-WEB
Install at 90 deg. to measure. Strongly recommend to use air purge AND insulated cooling box to prevent lenses from dusty ash. Some samples are dark in color and not in good condition to reflect well. To get better results, place a sample in a stable condition, such as measured on leveled surface, and with proper distance; eliminating external lights, or preventing from dust, as possible. Also, it is highly recommended to run zero calibration by simply using IR-WEB every 3 months.

moisture in incinerator ash

Moisture(water) has a unique infrared absorption spectrum regions. Water absorbs at wavelength of 1.43, 1.94, and 3 micrometers.

moisture in incinerator ash
 

Calibration curve is a correlation between moisture determined by customer's reference instrument and IR absorption measured by IRMA.

Basic Sample Test for Moisture
  1. Prepare samples with various moisture content
  2. Show each sample to IRMA and record absorption level
  3. As conducting step-2, determine moisture level with your reference instrument
  4. Put all data points on a X/Y graph and see if there’s a correlation
Note: Reference instrument may vary depending on the method
(by volume or weight).


For more information on any industrial moisture analysis, contact:

Power Specialties. Inc.
www.powerspecialties.com
9118 E. 72nd Terrace
Raytown, MO 64133
Toll Free: (800) 432-6550
Phone: (816) 353-6550
Fax: (816) 353-1740

Careful Control of Moisture in Wheat Flour Process Prevents a Sticky Mess

Infrared moisture analyzer
Infrared moisture analyzer
(courtesy of Chino America)
Wheat flour production requires very accurate moisture control because wheat flour powder is easy to be converted into a sticky, doughy mess with excess moisture. In order to prevent excess moisture from “gumming” up the works, the use of infra-red light moisture analyzers are deployed.

IR moisture analyzers shine light onto the product as it passes along via conveyor belt. The instrument measures the light being reflected back by the sample. Since the moisture in the product will absorb some of the IR light, fewer of those particular wavelengths are reflected back to the measurement sensor in the instrument. By determining the amount of light absorbed you can calculate the amount of moisture in the product.

Moisture detection diagram
Moisture detection diagram for wheat flour process
(courtesy of Chino America)


The analyzers used in the wheat flour application measure from 5 to 15% moisture (with a ±0.2% accuracy) in the flour during the final processing before its packed into bags. By using this IR analyzer, maintaining very consistent quality and avoiding too much moisture in the product is possible.
Chino model IRMA1100
Chino Infrared Moisture Analyzer

Additionally, production costs were lowered because of more efficient control of its drying process. To prevent over-drying, a cascade control scheme was adopted, where the signals from moisture gauge combined with temperature measurement are used to control temperature of the drier.

For more information on Infrared moisture analyzers, contact:

Power Specialties, Inc.
9118 E. 72nd Terrace
Raytown, MO 64133
Toll Free: (800) 432-6550
Phone: (816) 353-6550
Fax: (816) 353-1740