Showing posts with label laser level. Show all posts
Showing posts with label laser level. Show all posts

Level, Distance and Position Measurement of Solids and Liquids Up to 164ft (50m) - The Hawk OptioLaser L100

The OptioLaser L100

The Hawk Measurement Systems OptioLaser L100 is a non-contact laser sensor that measures the distance between solid and liquid surfaces, slurries, and muddy water. From a metal plate on the side of an overhead crane to the top of material contained in a silo, solid surfaces may be anything. Use the OptioLaser for both distance or level measurement through an easy-to-use menu system, and its high precision, long-range, and quick update rate make it an ideal sensor for a wide range of applications.


OptioLaser L100 Features:

  • Non-contact measurements with laser technology
  • 303 stainless steel housing
  • Measurement range up to 50m (164ft)
  • Continuous measurement with a resolution of 10mm
  • NAMUR compliant 4-20mA output
  • Two normally open relay outputs
  • Easy configuration via USB

OptioLaser L100 Applications:

  • Shaft
  • Bypass
  • Basin
  • Stilling Well
  • Sewage Plant
  • Other
  • Tank or Vessel

OptioLaser L100 Specifications:

  • Accuracy: <0.1% of full range at 20ºC (68ºF)
  • Maximum Range: up to 50m (164ft)
  • Operating Temp: -20ºC to 60ºC (-4ºF to 140ºF)
  • Resolution: 10mm (0.39in)

For more information in Nebraska, Iowa, Missouri, and Kansas contact Power Specialties, Inc. Call them at (816) 353-6550 or visit their website at https://powerspecialties.com.

Advanced Laser Level Measurement for Liquids

OptioLaser S300
The Hawk Measurement Systems OptioLaser S300 Laser is a new product that can be used for the detection of all types of liquids, regardless of their dielectric properties.

This laser level detection system can accurately and reliably measure highly reflective liquids, clear liquids and even turbulence liquids. Due to its narrow beam divergence, it can be used to measure through grates and narrow passages, and even next to flat walls.

Principle of Operation

The Hawk OptioLaser S300 are user configurable and can be tuned to your specific application. The device uses an infrared, low-gain GaAs laser diode, which allows light energy of 905 nm. to travel to the surface of any liquid and is reflected back. This time-off-light (the time the laser pulse took to travel to the liquid and back) is then calculated into a distance. The low-gain diode allows for accurate measurement of even highly reflective, clear liquids, irrespective of the media dielectric properties. The narrow beam divergence of 3 milliradians (equal to 3ft at 1000ft) allows for easy installation, even near walls or thru narrow passages.

The OptioLaser S300 has strong appeal and wide application in the water, waste water, chemicals processing, food and beverage industries.

Read more about the OptioLaser S300 Laser measurement system by reviewing the embedded document below or you can download the "Optio S300 Liquid Laser Series for Fluid Level Measurement" PDF here.

For questions or application assistance, contact Power Specialties by visiting https://powerspecialties.com or by calling (816) 353-6550.