Showing posts with label combustion. Show all posts
Showing posts with label combustion. Show all posts

Electric and Pneumatic Damper Drives for Combustion Air and Flue Gas

Damper Drives
Download the Damper Drive Catalog Here
There are more than 45,000 industrial and commercial boilers larger than 10 MMBtu/hr in the United States with a total fuel input capacity of 2.7 million MMBtu/hr. One way to improve the efficiency of these boilers is to improve the combustion control system.

Current combustion control systems lack continuous carbon monoxide and nitrogen oxide emissions monitoring capability and the automated controls needed to improve fuel performance. A novel combustion control system, along with gas sensors, sets the opening of fuel and air inlets based on flue-gas concentrations. Continuous feedback from measurements of oxygen, carbon monoxide, and nitrogen oxide concentrations enable the control system to improve combustion efficiency while maintaining low carbon monoxide and nitrogen oxide emissions and allows continuous monitoring of boiler performance.

Combustion air and flue gas damper drives fill a critical role requiring safety, accuracy and reliability of the combustion control system. The proper damper drive delivers quality, power and performance providing  precise control and speed increases the BTU/Fuel ratio and increases the MW/Fuel ratio.

Rotork offers a full-line of electric and pneumatic damper control solutions for the isolation and control of combustion air and flue gas. Our products improve the efficiency and reliability of large and small boilers, furnaces and process heaters.

DOWNLOAD THE ROTORK TYPE-K DAMPER DRIVE CATALOG FROM THIS WEB PAGE


For more information, contact Power Specialties, Inc. Call them at (816) 353-6550 or visit their web site at https://www.powerspecialties.com.

Combustion & Fired Heater Optimization: An Analytical Approach to Improving Safe & Efficient Operations

Combustion & Fired Heater Optimization
Combustion sources such as furnaces and red heaters play a critical role in the process industry. Unfortunately, combustion requires large amounts of fuel (gas, fuel oil). As a result, combustion efficiency directly influences the performance and operational costs of production facilities. However, efficiency is not the only concern. Compliance and safety are major challenges as well.

Download this eBook to read more on combustion and fired heater optimization and deploy an analytical approach to improving safe & efficient operations.

Alternatively, you view the embedded version below.

If you have questions, please call Power Specialties at (816) 353-6550 or fill out this online form.

A Precise Combustion Airflow Measurement Station Designed for the Power Industry

The objectives in the power industry today are twofold;
  • To lower emissions 
  • Increase plant performance
Precise measurement of combustion airflow and fuel rates positively contributes to achieving those objectives, by providing the information needed to optimize stoichiometric ratios and facilitate more complete, stable combustion. Usable measurements cannot be obtained from existing devices such as Venturis, foils, jamb tubes, etc., or instrumentation such as thermal anemometers due to limited available straight duct runs, low flow rates, proximity to modulating control dampers, broad turndown range, and high concentrations of airborne particulate (flyash). 

There is a product, however, by Air Monitor Corporation that reliably and consistently provides precise combustion airflow measurement. The CA Station has both an integral airflow processing cell and Fechheimer-Pitot measurement technology and is engineered to meet the challenging operating conditions of the typical power plant. It's capable of providing mass flow measurement of PA, SA, and OFA within an accuracy of ±2-3% of actual airflow.
CA Station
The Air Monitor CA Station

While the main functions of primary air are to first dry and then pneumatically convey the pulverized coal from the mill to the individual burners, it also determines coal particle velocity at the burner exit, influencing the flame position relative to the burner tip and impacting flame stability, both key factors in achieving optimized burner performance. Accurate PA measurement obtained with a CA Station can contribute to reducing NOx and CO, improving flame stability, avoidance of coal pipe layout, minimizing LOI/UBC, reducing waterwall corrosion, and increasing combustion efficiency.

The CA Station is also ideally suited to measure SA entering each burner level of a partitioned windbox, SA being taken out of a windbox to supply multiple OFA ports, at the ducted inlet of FD fans, and bulk SA entering each windbox of a corner fired unit.

For more information about the CA Staton, contact Power Specialties by visiting http://www.powerspecialties.com or calling (816) 353-6550.

The Need for Combustion Airflow Measurement

Combustion Airflow (CA) Measurement Station
Combustion Airflow
Monitor Station
(courtesy of Air Monitor)
A Combustion Airflow (CA) Measurement Station is a multi-point, self averaging Pitot traverse station designed to provide accurate and repeatable primary, secondary and/or tertiary airflow measurement in gas, oil or coal fired power plants.

The objectives in the power industry today are twofold; to lower emissions, and increase plant performance. Precise measurement of combustion airflow and fuel rates positively contributes to achieving those objectives, by providing the information needed to optimize stoichiometric ratios and facilitate more complete, stable combustion. Usable measurements cannot be obtained from existing devices such as venturis, foils, jamb tubes, etc., or instrumentation such as thermal anemometers due to limited available straight duct runs, low flow rates, proximity to modulating control dampers, broad turndown range, and high concentrations of airborne particulate (flyash).

To lean more about Combustion Airflow Measurement, read the document below.

For more information on this technology, contact:
Power Specialties, Inc.
PO Box 9566
9118 E. 72nd Terrace
Raytown, MO 64133
Toll Free: (800) 432-6550
www.powerspecialties.com